Description
The Omron’s V1000 frequency inverter is the result of years of experience as the European market leader and represents a revolution in inverter design. Compact and sensor-less, the V1000 series has all of the features and performance that you have grown to expect from the world’s leading inverter/drive manufacturer. Its new features, not only enable it to outperform previous inverters and make it even easier for users to install and set up, it is also compacter by far. But the big difference is that it takes quality and reliability to a new high level. For no matter where you want it to operate, it will deliver the same high performance for many years after you have fitted it and forgotten about it.
- Up to 15 kW / 18,5 kW
- Built-in filter
- 10-years service life
- Control terminal board with memory
- Faster CPU’s
- Current vector control
- Low-noise technology
- IM & PM Motor control
- On-line tuning
- Embedded safety stop function Category 3 (EN954-1)
| Manufacturer: | Omron |
| Series: | V1000 |
| Model: | VZAB0P4BAA |
| Application: | general purpose |
| Capacity, kW: | 0.4 |
| Current, А: | 3 |
| Main power supply, V: | 200-240 |
| Phase: | 1 |
| Output frequency, Hz: | 0,1-400 |
| Enclosure: | IP 20 |
| Overload capacity, % per 1 min.: | 150 |
| Acceleration time, sec: | 0,01-6000 |
| Deceleration time, sec: | 0,01-6000 |
| EMC filter: | + |
| Braking unit: | - |
| Analog input: | 2 |
| Digital input: | 6 |
| Analog output: | 1 |
| Digital output: | 2 |
| Relay output: | 1 |
| RS485 (Modbus RTU): | + |
| Starting torque: | 150% |
| PID: | PID - controller |
| V/f control mode: | + |
| Vector control with feedback: | - |
| Sensorless vector control: | + |
| Operation temperature, °С: | -10.....+50 |
| Storage temperature, °С: | -20......+60 |
| Dimensions (W x H x D), mm: | 68x128x108 |
| Weight, kg: | 1 |
