Description
Distinctive features:
Functions:
- soft acceleration and deceleration
- potential-free control input for soft acceleration and deceleration
- 3 separately adjustable parameters accel. time, start voltage, decel. time
- boost-start selectable
- potential-free relay output for operating state unit bypassed and failure
Distinctive features:
- wo-phase controlled soft starter
- controlled by microcontroller
- optimized soft start
- connection in the motor delta winding (cost saving via smaller rating)
- current and torque reduction during acceleration
- easy mounting, for snap-mounting on 35mm standard rail
- integrated bypass relay
- parameterization by means of three potentiometers
- no additional control voltage required
- no mains neutral conductor (N) required
- economically priced substitute for star-delta starters
- plug-in power terminals
Manufacturer: | Peter Electronic |
Series: | VersiStart II (17А-45A) |
Model: | VS II 400-45 |
Application: | pumps / fans / general purpose |
Capacity, kW: | 22 |
Current, А: | 45 |
Main power supply, V: | 400 |
Phase: | 2 |
Output frequency, Hz: | 50/60 |
Enclosure: | IP20 (case) |
Acceleration time, sec: | 0,5-10 |
Deceleration time, sec: | 0,5-10 |
Operation temperature, °С: | 0°C…+45°C |
Max. switching cycle per hour: | 10 |
Starting current, % of rated current: | 500 |
Integrated bypass relay: | + |
Control type: | analog |
Microprocessor supply voltage: | ~ 380 V |
Motor protection (thermal model): | - |
Motor protection (input for thermistor/thermal relay): | + |
Motor protection (low current) : | - |
Motor protection (momentary motor overload): | - |
Motor protection (Others): | + |
JOG mode: | - |
DC braking: | + |
Inputs/Outputs: | control input, 2 relay outputs |
Separately adjustable parameters: | 4 |
Mounting: | DIN-rail |
Options: | Special voltages of 230 V and 480 V, a wide range of voltages from 400-600V with external control supply voltage Us 24 V, alarm contact, the start of acceleration to deceleration complete |