Description
The Toshiba VF-nC3 frequency inverter series allow the implementation of various technological tasks depending on the application and customer requirements.
- The output frequency range from 0.5 Hz to 400
- Accuracy of output frequency up to 0.5%
- Overcurrent 150% - 60 secs
- Operating Temperature -10 ... + 60 ° C
- Start feature enhancement point avtopodhvat rotating motor, a regenerative mode when the momentary supply voltage, 2 sets of acceleration and deceleration times
- Volt frequency motor control (constant and variable torque mode), sensorless vector control engine speed with auto-tuning of motor parameters, tuning lifting motor torque at low speed, automatic torque boost
- Reference frequency integrated dialer wheel or external potentiometer with built-in or external control panel, selecting one of 15 preset speeds, analog signal
- PID controller with control sensor failure
- Built-in EMC filter
- Built-in RS-485 port (ModBus RTU support)
| Manufacturer: | Toshiba |
| Series: | VF-nC3 |
| Model: | VFNC3S-2015PL |
| Application: | general purpose |
| Capacity, kW: | 1.5 |
| Current, А: | 7.5 |
| Main power supply, V: | 200-240 |
| Phase: | 1 |
| Output frequency, Hz: | 0,1-400 |
| Enclosure: | IP20 |
| Overload capacity, % per 1 min.: | 150 |
| Acceleration time, sec: | 0-3000 |
| Deceleration time, sec: | 0-3000 |
| EMC filter: | + |
| Braking unit: | optional |
| Analog input: | 1 |
| Digital input: | 4-5 |
| Analog output: | 1 |
| Digital output: | 2 |
| Relay output: | 1 |
| RS485 (Modbus RTU): | + |
| PID: | PID - controller |
| V/f control mode: | + |
| Vector control with feedback: | - |
| Sensorless vector control: | + |
| Operation temperature, °С: | -10.....+60 |
| Storage temperature, °С: | -20.....+70 |
| Dimensions (W x H x D), mm: | 105х130х156 |
| Weight, kg: | 1,5 |
