| Product Attribute | Attribute Value | Search |
|---|---|---|
| Accuracy | 0.8 °C, 2.1 °C, 2.3 °C °C | |
| Approvals | CSA C22.2, File E179259, UL, UL61010A-1 | |
| Connection Type | Cage-Clamp | |
| Cut Out, Panel | 3.62×1.77 ' | |
| Depth | 0.197' (5mm) | |
| Dimensions | 4.2' L x 3.8' W x 1.95' H | |
| Dimensions, Cutout, Inches | 127 x 53.4 mm | |
| Display Digit Height | 0.56 in. | |
| Display Resolution | 1 ° | |
| Display Type | LED | |
| Frequency | 50⁄60 Hz | |
| Function | Temperature | |
| Measurement Range | -200 to +400 °C for T, -200 to +1000 °C for E, -200 to +760 °C for J, -200 to +1250 °C for K, 0 to +1768 °C for R, +150 to +1820 °C for B, -200 to +1300 | |
| Measuring Range | +150 to +1820 (B Type), -10 to +80, -200 to +1000 (E Type), -200 to +1250 (K Type), -200 to +1300 (N Type), -200 to +400 (T Type), -200 to +760 (J Type), 0 to +1768 (R, S Type) mV, °C | |
| Minimum Operating Temperature | 0 °C | |
| Number of Digits | 4 Digits | |
| Operating Temperature | 0 to 50 °C °C | |
| Primary Type | Electronic | |
| Product Header | PAX Lite Thermocouple Meter | |
| Resolution | 1 °C | |
| Series | PAX Lite Series | |
| Standards | UL Recognized, CSA Certified, CE Approved | |
| Supply Voltage | 85 to 250 VAC | |
| Temperature Range | 0 to +50 °C | |
| Temperature, Opening, Maximum | 50 °C | |
| Temperature, Range, Measuring | -200 to +400 °C | |
| Termination | Terminal Block | |
| Thermocouple Type | T | |
| Type | Electronic | |
| Voltage, Operating | 85 to 250 VAC | |
| Weight | 0.65 |
\n\n
Overview
Red Lion PAX Lite Series – Model PAXLTC Thermocouple Meter:
The PAX Lite Thermocouple Meter accepts inputs from standard thermocouples and precisely linearizes them. A full 4-digit display accommodates a wide range of temperature inputs. The unit automatically compensates for cold junction, NBS linearity and the meter’s zero and span. The meter features a readout choice of either Fahrenheit or Celsius with 0.1 or 1 degree resolution. English Style display prompts and front panel buttons aid the operator through set-up and operation. With a few simple steps the unit can be used as a millivolt meter. This mode is useful in monitoring and displaying the actual voltage produced at the thermocouple probe junction and as an aid in troubleshooting for a faulty thermocouple probe.
The meter provides a Peak (HI) and Valley (LO) reading memory with selectable capture delay time. The capture delay is used to prevent detection of false Peak or Valley readings that may occur during start-up or unusual process events. The Peak and Valley readings are stored at power-down to allow monitoring the process limits over any length of time (shifts, days, etc.). Programmable digital filtering enhances the stability of the reading. All setup data is stored in EEPROM, which will hold data for a minimum of 10 years without power. The meter has several built-in diagnostic functions to alert operators of any malfunction. Extensive testing of noise interference mechanisms and full burn-in makes the indicator extremely reliable in industrial environments. The front bezel meets NEMA 4X/IP65 requirements for wash down applications.
Features:
