Product Attribute | Attribute Value | Search |
---|---|---|
Application | Non volatile memory | |
Current Rating | 7.3 mA | |
Depth | 5.87' (149.1mm) | |
Dimensions | 2.95 x 5.87 x 2.85 in. | |
Display Type | LED | |
Enclosure Rating | IP65 | |
For Use With | Speed Control | |
Input Type | Voltage | |
IP Rating | IP65 | |
Length | 2.95' (74.93mm) | |
Memory | EEPROM | |
Mounting Style | Panel Mount | |
Operating Temperature | 0 to +50 °C | |
Power Rating | 10 VA | |
Primary Type | Driver | |
Product Header | Motor Drive Controller | |
Series | MDC Series | |
Special Features | Non volatile memory | |
Standards | CE | |
Supply Voltage | 115 to 230 VAC | |
Temperature Operating Range | 0 to +50 °C | |
Termination | Plug-In | |
Type | Motor | |
Width | 2.85' (72.4mm) |
\n\n
Overview
115/230 VAC Motor Drive Controllers
The Motor Drive Controller (MDC) regulates motor speed by varying an isolated DC control signal to the motor drive system. There are two modes of operation, Master and Follower. Master Mode provides control of a motor's speed directly via programmed speed set points in the MDC. Follower Mode controls a motor's speed as a ratio to a second motor's speed or outside frequency source. The MDC has five dedicated control inputs, six programmable control inputs, and three solid-state outputs (2 programmable alarm and one dedicated drive enable output).
Features