| Product Attribute | Attribute Value | Search |
|---|---|---|
| Accuracy | ±0.01% % | |
| Connection Type | Wire Leads | |
| Contact Current Rating | 5 A | |
| Depth | 0.118' (3mm) | |
| Dimensions | 660.4 x 57.15 x 200 mm | |
| Display Digit Height | 2.25 | |
| Display Resolution | 0.001 Sec. (Minimum Digit), 1 hr. (Single Digit) | |
| Display Size | 4 in. | |
| Display Type | LED | |
| Function | Timer | |
| Length | 26' (660.4mm) | |
| Material, Casing | Aluminum | |
| Maximum Operating Temperature | 65 °C | |
| Measurement Range | 0 to 999999 | |
| Minimum Operating Temperature | 0 °C | |
| Mounting Style | Wall Mount | |
| Mounting Type | Panel Mount | |
| Number of Digits | 6 Digits | |
| Number of Ports | 2 Port | |
| Primary Type | Electronic | |
| Product Header | 6-Digit Large Display Timers | |
| Series | LDT Series | |
| Special Features | RS485/RS232 Communications | |
| Supply Voltage | 250 V VAC/VDC | |
| Temperature Operating Range | 0 to +65 °C | |
| Terminal Type | Terminal Block | |
| Termination | Terminal Block | |
| Type | Counter | |
| Width | 2.25' (57.15mm) |
\n\n
Overview
Red Lion LDT Series – LD4T06P0 LDSS Counter | Large Serial Slave Display:
The Large Display Timer and Cycle Counter is a versatile display that functions as an Elapsed Timer or Preset Timer, with full-featured user programmability. The meter includes a built-in Cycle Counter, relay output and serial communications capability. The 6 digit displays are available in either 2.25' or 4' high red LED digits with adjustable display intensity. The 2.25' high models are readable up to 130 feet. The 4' high models are readable up to 180 feet. Both versions are constructed of a NEMA 4X/IP65 enclosure in light weight aluminum.
The Timer has two signal inputs and eight input operating modes. These modes provide level active or edge triggered start/stop operation. The Timer features 18 selectable timer ranges to cover a wide variety of timing applications. The built-in Cycle Counter can be linked to timer operation to count timing cycles, or function as a totally independent counter, accepting count speeds up to 500 Hz. The display can be toggled either manually or automatically between the Timer and Counter values. In addition to the Timer/Counter inputs, a programmable User Input is provided to perform a variety of meter functions. DIP switches are used to configure the inputs for current sinking (active low) or current sourcing (active high) operation. The Setpoint Output can be assigned to the Timer or Counter value, and configured to suit a variety of control and alarm requirements. The meter also includes RS232 or RS485 serial communications.
Features:
