| Product Attribute | Attribute Value | Search |
|---|---|---|
| Application | The IFMR utilizes a seven position DIP switch, a rotary switch, a pushbutton and two indication LEDs to accomplish input circuit configuration, operational parameter set-up, input signal, and relay status indication | |
| Contact Form | SPDT | |
| Current Rating | 5 A | |
| Dimensions | 27.5mm W x 4.2mm H x 79.2mm D | |
| Display Type | LED | |
| For Use With | Sensors/Switches/TTL | |
| Input Type | Analog | |
| Mounting Type | DIN Rail | |
| Number of Channels | 1 | |
| Operating Temperature | 0 to +50 °C | |
| Output Type | Relay | |
| Power Rating | 5.5 VA | |
| Primary Type | Controller | |
| Product Header | IFMR DIN Rail Speed Switch | |
| Series | IFMR Series | |
| Special Features | Simple On-Line Trip Frequency Setting, User Settable Trip Frequency from 0.1 Hz To 25 KHz, Over-Speed, Under-Speed, and Zero-Speed Detection, Relay Latching, Alarm Override, and Alarm Reset Functions, Programmable Input Circuit Accepts Outputs from a Variety of Sensors, Input and Relay Status Indication LED's | |
| Standards | cURus, CE | |
| Supply Voltage | 85-250 VAC | |
| Termination | Screw | |
| Voltage Rating | 85 to 250 VAC |
\n\n
Overview
The Model IFMR accepts a frequency input, and controls a single relay (SPDT) based on the value of the input frequency. The Trip frequency can be set to any value from 0.1 Hz to 25 KHz. The IFMR can be set to trip on overspeed, or underspeed (including zero speed). Offset and hysteresis values can be incorporated into the trip setting to eliminate output chatter. LED indicators for both the Input signal and the Relay status are provided. Two separate input connections for external push-buttons are also provided. One external input overrides the trip detection function, and holds the relay in the release state as long as the input is pulled to common. The other external input clears a latched trip condition when pulled to common. The IFMR utilizes a seven position DIP switch, a rotary switch, a pushbutton and two indication LEDs to accomplish input circuit configuration, operational parameter set-up, input signal, and relay status indication. The input circuitry is DIP switch selectable for a variety of sources. The indication LEDs are used during normal operation to display the input signal and relay status of the IFMR. These LEDs are also used to proidevisual feedback to the user of the current parameter settings during parameter set-up Features:
