Description
Powerdrive F300 by Emerson enables the most efficient performance and highest energy savings for fan, pump and compressor applications. Designed in conjunction with Emerson’s LSRPM and PLSRPM permanent magnet (PM) motors, the Dyneo® solution provides the highest energy savings available in the market today. Powerdrive F300 frequency inverter is also designed to control standard AC induction motors. The drive is matched with IEC induction motors from Emerson Industrial Automation's IMFinity® range, providing the control, reliability and ease of installation and commissioning required for your pumping, ventilation or compression application.
- Smaller drive dimensions to allow for easier, more economical installation
- Programming software enables rapid, clear code development and the drive interface and PC tools also allow fast, simple drive commissioning, diagnostics and maintenance
- Equipped with wide motor control functionality flexible to ventilation, pumping and compression application needs, which can be rapidly accessed to exacting levels of flow control
- Comprehensive I/O offering boosts component connectivity
- Multiple fieldbus protocols are supported
- Two PID Controllers with anti-windup and user scaling provide flow-specific functionality
- Logic functions including 'and' , 'or', 'invert', 'binary sum' and 'timer' achieved through easy menu setup
- Real-time clock available on the KI-HOA Keypad RTC included in standard offer
- Water hammer control with S-ramp deceleration
- Catch a spinning motor
- On-board Fire Mode allowing run to failure in the event of a fire for the extraction of smoke
- Low load condition monitoring and hysteresis for broken belt and dry pump detection
| Manufacturer: | Emerson |
| Series: | Powerdrive F300 |
| Model: | F300-09202660E10 |
| Application: | pumps / fans |
| Capacity, kW: | 75 |
| Current, А: | 266 |
| Main power supply, V: | 200-240 |
| Phase: | 3 |
| Enclosure: | IP20 / NEMA1 / UL TYPE 1, IP65 / NEMA4 / UL TYPE 12 rating is achieved on the rear of the drive when through panel mounted |
| Overload capacity, % per 1 min.: | 110 |
| EMC filter: | + |
| Braking unit: | + |
| Analog input: | 2 |
| Digital input: | 3 |
| Analog output: | 2 |
| Digital output: | 3 |
| Relay output: | 2 |
| RS485 (Modbus RTU): | Modbus RTU, DeviceNet and PROFIBUS |
| PID: | PID - controller |
| V/f control mode: | + |
| Vector control with feedback: | - |
| Sensorless vector control: | - |
| Operation temperature, °С: | -20.....+40 |
| Storage temperature, °С: | -40.....+55 |
| Dimensions (W x H x D), mm: | 310x1069x290 |
| Weight, kg: | 46 |
