Eaton’s PowerXL™ DE1 variable speed starter offers the advantages of both a motor starter and a variable frequency drive in a single device. The DE1 is a compact and easy-to-use device with the ability to change the speed of the motor with the simplicity of a contactor starter. With 14 basic parameters, SmartWire-DT® connectivity and an intuitive configuration module, the DE1 setup and commissioning is easy for any panel builder and MOEM. The DE1 was designed for customers who have concerns of the complexity of a VFD but still require variable frequency and advanced motor protection. Models rated at 480 volts, three-phase, 50/60 Hz are available in sizes ranging from 0.5 to 10 hp. Models rated at 230 volts, single-phase in/ three-phase out, 50/60 Hz are available in sizes ranging from 0.33 to 3 hp.
- Compact, space-saving design
- Rugged design rated up to 60 °C
- DIN rail and screw mountable
- Narrow footprint for true side-by-side installation
- Rated for group motor applications
- Low capacitor design for low harmonics
- Removable I/O terminal blocks
- Three digital inputs
- One digital/analog (programmable) input
- One relay output
- Contactor style power wiring
- RS-485/Modbus as standard
- Efficient, simple design without a keypad
- Three indicating LEDs for fault and condition status
| Manufacturer: | Eaton |
| Series: | DE1 |
| Model: | DE1-129D6NN-N20N |
| Application: | general purpose |
| Capacity, kW: | 2,2 |
| Current, А: | 9.6 |
| Main power supply, V: | 220-240 |
| Phase: | 1 |
| Output frequency, Hz: | 0-500 |
| Enclosure: | IP20 |
| Overload capacity, % per 1 min.: | 150 |
| Acceleration time, sec: | 0,1-600 |
| Deceleration time, sec: | 0,1-600 |
| Analog input: | 1 |
| Digital input: | 3 |
| Relay output: | 1 |
| RS485 (Modbus RTU): | + |
| Operation temperature, °С: | -10.....+60 |
| Storage temperature, °С: | -40.....+70 |
