| Product Attribute | Attribute Value | Search |
|---|---|---|
| Application | Industrial | |
| Approvals | EN 61010-1, File E179259, IEC 529, IEC 61010-1, IP65 (Face Only), Type 4X Outdoor (Face Only), UL Listed, UL50, UL508 | |
| Backlighting | Backlight | |
| Bezel | NEMA 4X⁄IP65 Sealed Front Panel | |
| Connection Type | Plug-in Terminal | |
| Counter Type | Miniature Electronic | |
| Cut Out, Panel | 5.5 L x 2.1 H in., 140 L x 53.4 H mm ' | |
| Depth | 0.157' (4mm) | |
| Dimensions | 1.10 x 2.00 x 1.64' | |
| Dimensions, Cutout, Inches | 45 x 22.2 mm mm | |
| Display Digit Height | 8.9 mm mm | |
| Display Type | LCD | |
| Function | Counter | |
| Input Signal Type | 1.5 VDC or 50-250 VDC/VAC | |
| Input Type | Logic, Voltage | |
| Maximum Operating Temperature | 50 °C | |
| Minimum Operating Temperature | 0 °C °C | |
| Mounting Type | Panel Mount | |
| Number of Digits | 8 Digits | |
| Operating Temperature, Maximum | 50 °C | |
| Operating Temperature, Minimum | 0 °C | |
| Primary Type | Electronic | |
| Series | CUB 7 Series | |
| Supply Voltage | 6 to 26 VDC VDC | |
| Temperature Range | 0 to +50 °C °C | |
| Temperature, Opening, Maximum | 50 °C °C | |
| Type | Electronic |
\n\n
Overview
The CUB7 series is an 8-digit lithium battery powered miniature counter or timer with large 0.35' (8.9 mm) high digits. It has an LCD read-out available in Positive Imagine Reflective, Negative Image Transmissive with yellow/green or red backlighting. The backlight versions require an external 6-26 VDC power supply. The CUB7 series is housed in a lightweight, high impact plastic case with a clear viewing window. The sealed front panel with silicon rubber keypad meets NEMA 4X/IP65 specification for wash-down and/or dusty environments, when properly installed with supplied panel gasket and mounting clip.
Both counter and timer CUB7 models are available with a low voltage input (28 VDC max) or an isolated high voltage input (50-250 VDC/VAC). The low voltage input has DIP switch selections for SINKING or SOURCING along with a HIGH/LOW FREQUENCY selection (low frequency for contact inputs). Both units have front panel keypads that can be used to reset the display. The keypad can be enabled/disabled via a single DIP switch. The standard unit uses 22 gauge wires for external connections, an optional plug-in terminal block is available.
Feaures:
