CUB7CVR0 Red Lion Controls

Write a Review
SKU:
CUB7CVR0
Availability:
2 - 3 weeks

Counter; HIGH VOLT RED BACKLIT 8-DIGITProduct Specifications Product Attribute Attribute Value Search Application Industrial Approvals CE,…

Adding to cart… The item has been added
Ask for a Quotation

Ask for a Quotation

Feel free to inquire
  • Security Image 1
Description
Counter; HIGH VOLT RED BACKLIT 8-DIGIT

Product Specifications
Product Attribute Attribute Value Search
Application Industrial
Approvals CE, cUL
Backlighting Backlight
Bezel NEMA 4X⁄IP65 Sealed Front Panel
Connection Type Plug
Counter Type Miniature Electronic
Cut Out, Panel 1.77×0.88 '
Depth 0.157' (4mm)
Dimensions, Cutout, Inches 45 x 22.2 mm mm
Display Digit Height 8.9 mm mm
Display Type LCD
Function Timer
Maximum Operating Temperature 50 °C
Minimum Operating Temperature 0 °C °C
Mounting Type Panel
Number of Digits 8 Digits
Operating Temperature, Maximum 50 °C
Operating Temperature, Minimum 0 °C
Primary Type Electronic
Series CUB 7 Series
Supply Voltage 6 to 26 VDC VDC
Temperature Range 0 to +50 °C °C
Temperature, Opening, Maximum 50 °C °C
Type Electronic
\n

\n\n

Overview

The CUB7 series is an 8-digit lithium battery powered miniature counter or timer with large 0.35' (8.9 mm) high digits. It has an LCD read-out available in Positive Imagine Reflective, Negative Image Transmissive with yellow/green or red backlighting. The backlight versions require an external 6-26 VDC power supply. The CUB7 series is housed in a lightweight, high impact plastic case with a clear viewing window. The sealed front panel with silicon rubber keypad meets NEMA 4X/IP65 specification for wash-down and/or dusty environments, when properly installed with supplied panel gasket and mounting clip.
Both counter and timer CUB7 models are available with a low voltage input (28 VDC max) or an isolated high voltage input (50-250 VDC/VAC). The low voltage input has DIP switch selections for SINKING or SOURCING along with a HIGH/LOW FREQUENCY selection (low frequency for contact inputs). Both units have front panel keypads that can be used to reset the display. The keypad can be enabled/disabled via a single DIP switch. The standard unit uses 22 gauge wires for external connections, an optional plug-in terminal block is available.

Feaures:

  • Internal Lithium Battery for up to 7 Years Operation
  • Count Speeds up to 10 kHz
  • 9 Programmable Time Ranges
  • Contact, Logic, Open Collector or High Voltage Inputs
  • Standard Wire Connections or Optional Plug-In Terminal
  • NEMA 4X/IP65 Sealed Front Bezel

  • Bottom Banner