Smoke Detectors

ST9 For ducts smaller than 0.6 m use sampling tube length 0.6 m. For ducts between 0.6 and 1.3 m use sampling tube length 1.5 m. For ducts over 1.4 m use sampling tube length 2.8 m. ST2 Sampling tube 0.6 meter for UG-5 and UG-7 ST…

ST5 For ducts smaller than 0.6 m use sampling tube length 0.6 m. For ducts between 0.6 and 1.3 m use sampling tube length 1.5 m. For ducts over 1.4 m use sampling tube length 2.8 m. ST2 Sampling tube 0.6 meter for UG-5 and UG-7 ST…

ST2 For ducts smaller than 0.6 m use sampling tube length 0.6 m. For ducts between 0.6 and 1.3 m use sampling tube length 1.5 m. For ducts over 1.4 m use sampling tube length 2.8 m. ST2 Sampling tube 0.6 meter for UG-5 and UG-7 ST…

ABAV-S3 230V ATEX ABAV-S3 ATEX 230V is used together with a zener barrier as a control unit for ATEX smoke detector EVC-PY-IS ATEX. For more information, please contact our sales department by phone, +46 31-69 53 13. Properties C…

KE-1000 The KE-1000 control unit is specially designed as a local fire and evacuation alarm for small facilities such as nurseries, hotels, B&Bs, industries, offices, etc. Several different types of detectors can be connected …

ABAV-S3 230V The control unit is designed to fulfil the demands made to provide reliable fire protection when used together with our smoke detectors. Equipped with relay contacts for controlling dampers and fans. In addition to sm…

EVC-PY-DA-UL EVC-PY-DA-UL has an intelligent monitoring circuit that continuously checks and adjusts the sensitivity for optimum functionality during the entire life of the detector. When the detector can no longer compensate for …

EVC-PY-IS ATEX The EVC-PY-IS ATEX detector is used in areas that require Ex-protected or intrinsically safe smoke detectors. The smoke detector provides a quick and reliable warning. The detection chamber contains a light and phot…

EVC-PY-DA-MB Connect EVC-PY-DA-MB to a Modbus master that scans the Modbus registers in the smoke detector. Three status indications are possible to read out of the smoke detector: Smoke alarm, service alarm (contamination) and re…

ABAV-S3 24V The control unit is designed to fulfil the demands made to provide reliable fire protection when used together with our smoke detectors. Equipped with relay contacts for controlling dampers and fans. In addition to smo…

UG-3-O Uniguard has been developed to detect smoke in ventilation ducts and consists of a smoke detector, mounted in an adapter system where both tube and housing are specially designed for optimum airflow through the smoke detect…

UG-7 Uniguard is developed to detect smoke in ventilation ducts and combines a smoke detector and an adaptor system where both venturi pipe and housing are specially designed for optimum airflow through the smoke detector. The UG-…

UG-7-A6O Smoke entering the duct system will be dispersed throughout the whole building. The Uniguard duct detectors utilizes the photoelectric sensing method and is designed to sense the existence of smoke in the duct. This desig…

UG-5-AFR-230V Uniguard has been developed to detect smoke in ventilation ducts and combines a smoke detector and an adaptor system where both tube and housing are specially designed for optimum airflow through the smoke detector. …

EVC-PY-DA Calectro introduces a completely new optical smoke detector model for ventilation ducts and ceiling installation. The new smoke detector EVC-PY-DA has been equipped with a new mechanical optical chamber and a new light s…