Calectro

UG-3-A5O Uniguard has been developed to detect smoke in ventilation ducts and consists of a smoke detector with relay outputs mounted in an adapter system where both tube and housing are specially...

UG-3-NS-AOS Uniguard has been developed to detect smoke in ventilation ducts and consists of a smoke detector, mounted in an adapter system where both tube and housing are specially designed for...

UG-3-O Uniguard has been developed to detect smoke in ventilation ducts and consists of a smoke detector, mounted in an adapter system where both tube and housing are specially designed for optimum...

UG-5-AFR-230V Uniguard has been developed to detect smoke in ventilation ducts and combines a smoke detector and an adaptor system where both tube and housing are specially designed for optimum...

UG-7 Uniguard is developed to detect smoke in ventilation ducts and combines a smoke detector and an adaptor system where both venturi pipe and housing are specially designed for optimum airflow...

UG-7-A6O Smoke entering the duct system will be dispersed throughout the whole building. The Uniguard duct detectors utilizes the photoelectric sensing method and is designed to sense the existence...

UG-BESLAG For installation of Uniguard UG-2 on circular ducts or insulated rectangular ducts. Properties Easy to bend by hand Easy to install

UG-COVER Used as condensation protection for Uniguard Superflow smoke detector when mounted outdoors or in cold attics.

UG-COVER-75 Insulation cover UG-COVER-75 is used as condensation protection for Uniguard Superflow smoke detector when mounted outdoors or in cold attics. Properties Prevents condensation

UG-M-SENSE III The M-SENSE III is intended for use in areas where combustion offers a potential danger from hazardous air, such as in vehicle garages, loading bays, tunnels and mines. It offers...

UG-MB For mounting of Uniguard Superflow on circular or insulated flat ducts. Properties Easily adapted by hand Quick assembly

UG-MB-75 For mounting of Uniguard Superflow on circular or insulated flat ducts. The mounting bracket is deliverd together with a sealing sleeve and a rubber gasket. Properties Easily adapted by...

UG3-A-SENSE UG3-A-SENSE is designed to control ventilation by transmitting the measured carbon dioxide level and temperature to the system’s DUC (dataundercentral = data subcenter). According to the...

UG3-A-SENSE-V-D UG3-A-SENSE-V-D is intended to control ventilation in rooms where people are present. The sensor is a basic component which is suitable for many different ventilation strategies. Set...

UIP-5 Software for programming of CO2 sensors for ventilation systems. Download the software via the link under “DOCUMENTS” tab. Software for the...

USB CABLE Cable for programming of CO2 sensors. This cable is suitable for the CO2 models mentioned in the list on the right...

VR-0.6M For ducts smaller than 0.6 m use venturi pipe length 0.6 m. For ducts between 0.6 and 1.3 m use venturi pipe length 1.5 m. For ducts over 1.4 m use venturi pipe length 2.8 m. VR-0.6M Venturi...

VR-1.5M For ducts smaller than 0.6 m use venturi pipe length 0.6 m. For ducts between 0.6 and 1.3 m use venturi pipe length 1.5 m. For ducts over 1.4 m use venturi pipe length 2.8 m. VR-0.6M Venturi...

VR-2.8M For ducts smaller than 0.6 m use venturi pipe length 0.6 m. For ducts between 0.6 and 1.3 m use venturi pipe length 1.5 m. For ducts over 1.4 m use venturi pipe length 2.8 m. VR-0.6M Venturi...

Technical data Voltage Supply 24V AC/DC -15%/+10%Not polarity sensitive Detector type Optical UG-5-AFR-24V Max. power consumption 220mA Operating...