Calectro

SOCK-H-V-2KIHigh bayonet base for sirens and beacon, white, IP65

SOL/RL/R/S Solista is a beacon with LED light source that has very low power consumption. Solista is powered by 10-30V DC. Solista has a DIP switch for setting the flash frequency (0.5Hz or 1Hz) and...

SOLMAXI-AF-CL-W-S Solista Maxi is a beacon with a LED light source that has very low power consumption and can be powered from 9-60V DC. Solista Maxi has a DIP switch for setting the functions: low,...

SOLMAXI-BF-CL-W-S Solista Maxi is a beacon with a LED light source that has very low power consumption and can be powered from 9-60V DC. Solista Maxi has a DIP switch for setting the functions: low,...

SOLMAXI-GF-CL-W-S Solista Maxi is a beacon with a LED light source that has very low power consumption and can be powered from 9-60V DC. Solista Maxi has a DIP switch for setting the functions: low,...

SOLMAXI-RF-CL-R-S Solista Maxi is a beacon with a LED light source that has very low power consumption and can be powered from 9-60V DC. Solista Maxi has a DIP switch for setting the functions: low,...

SOLMAXI-WF-CL-W-S Solista Maxi is a beacon with a LED light source that has very low power consumption and can be powered from 9-60V DC. Solista Maxi has a DIP switch for setting the functions: low,...

ST-EXTEND ST-EXTEND is an extension tube to standard air sampling tubes for Uniguard duct smoke detectors for ventilation system. The extension tube is compatible with all our venturi tubes from the...

ST-P-OM The detection chamber contains an emitter and a receiver. Normallly the pulsed light-ray from the emitter does not reach the receiver. When smoke particles enter the chamber they will reflect...

ST2 For ducts smaller than 0.6 m use sampling tube length 0.6 m. For ducts between 0.6 and 1.3 m use sampling tube length 1.5 m. For ducts over 1.4 m use sampling tube length 2.8 m. ST2 Sampling tube...

ST5 For ducts smaller than 0.6 m use sampling tube length 0.6 m. For ducts between 0.6 and 1.3 m use sampling tube length 1.5 m. For ducts over 1.4 m use sampling tube length 2.8 m. ST2 Sampling tube...

ST9 For ducts smaller than 0.6 m use sampling tube length 0.6 m. For ducts between 0.6 and 1.3 m use sampling tube length 1.5 m. For ducts over 1.4 m use sampling tube length 2.8 m. ST2 Sampling tube...

STB-4SE-12VRSmoke detector base with built-in relay for ST-P-12V.

STB-4SE-12VRL Smoke detector base with built-in relay for ST-P-12V. With closed-circuit relay.

STB-4SE-24VRSampling tube 0.6 meter for Uniguard Superflow, UG-5/7...

STB-4SE-24VRLSmoke detector base with built-in relay for ST-P-24V. With closed-circuit relay.

T-SENSE-VAV T-SENSE-VAV is an advanced and versatile 3-in-1 control unit with a colour touch screen. T-SENSE-VAV measures the CO2 concentration, temperature and relative humidity in the ambient air...

T-SENSE-VAV-D T-SENSE-VAV-D is an advanced and versatile 3-in-1 control unit with a colour touch screen. T-SENSE-VAV measures the CO2 concentration, temperature and relative humidity in the ambient...

UB-6 Base for smoke detectors: EVC-PY-DA, ST-P-DA, ST-I-DA, NS-AOS och NS-AIS. Properties Base for smoke detectors

UG-3-A4O Uniguard has been developed to detect smoke in ventilation ducts and consists of a smoke detector with relay outputs mounted in an adapter system where both tube and housing are specially...