Calectro

HFU204 Rubber gasket for long venturi tubes and mounting brackets. The gasket is used with our long venturi tubes when the tube has to go through the entire width of the duct and penetrate the duct...

IOMB-02 IOMB-02 is used to collect and distribute analogue and digital signals to and from regulators (DUC) using Modbus RTU communication. IOMB-02 is an IP54 enclosed I/O module that transmits...

IOMB-03 IOMB-03 is used to collect and distribute analogue and digital signals to and from regulators (DUC) using Modbus RTU communication. IOMB-03 is an IP54 enclosed I/O module that transmits...

IOMB-04 IOMB-03 is used to collect and distribute analogue and digital signals to and from regulators (DUC) using Modbus RTU communication. IOMB-03 is an IP54 enclosed I/O module that transmits...

Description IOMB-TCP/IP is a gateway for IOMB-02, IOMB-03 and IOMB-04 that permits communication with the I/O modules via TCP/IP. The TCP/IP gateway communicates internally with the I/O module via...

KE-1000 The KE-1000 control unit is specially designed as a local fire and evacuation alarm for small facilities such as nurseries, hotels, B&Bs, industries, offices, etc. Several different types...

KE-800 The KE-800 control unit is specially designed for controlling magnet-mounted doors. The KE-800 has connections to handle 230V supply, smoke detectors, magnets as well as alarm functions, if...

LED-03 is a light box for alarm indication of a hidden smoke detector. The light box is adapted to Calectros 24V smoke detectors, e.g. UG-3-O and EVC-PY-DA. Supply voltage from smoke detector: 24V...

M-SENSE III The M-SENSE III is intended for use in areas where combustion offers a potential danger from hazardous air, such as in vehicle garages, loading bays, tunnels and mines. It offers combined...

Microchip TCPIP Discoverer Software for identifying I/O modules via TCP/IP. The Microchip TCPIP Discoverer program searches for all connected gateways that have a TCP/IP circuit from Microchip and...

P-BAND-2-24V P-BAND is an analog P-regulator for a Pt1000 temperature sensor. It has a setpoint (SP) that can be set from -20 to +20⁰C. This is the starting point for the P band that can be set from...

PIR-TF-25-360 Calectro’s motion sensors are primarily intended for use within ventilation and lighting control. By detecting activity in rooms, it is possible to control the ventilation and lighting...

PIR-TFT-550-B Calectro’s motion sensors are primarily intended for use within ventilation and lighting control. By detecting activity in rooms, it is possible to control the ventilation and lighting...

PSW-1500 The pressure switch is factory-calibrated in the vertical position. If installed horizontally, this will affect the switching point as follows: – with cover facing upwards, switching point...

PSW-300 The pressure switch is factory-calibrated in the vertical position. If installed horizontally, this will affect the switching point as follows: – with cover facing upwards, switching point...

PSW-600 The pressure switch is factory-calibrated in the vertical position. If installed horizontally, this will affect the switching point as follows: – with cover facing upwards, switching point...

S-AIR-A232-0740Programmeringskabel för bärbara CO2-givare. RS232

SOCK-H-R-230VHigh bayonet base with 230Vac to 24Vdc converter. For sirens and beacon, red, IP65

SOCK-H-R-2KIHigh bayonet base for sirens and beacon, red, IP65

SOCK-H-V-230VHög bajonettsockel med 230Vac till 24Vdc omvandlare. För sirener och blixtljus, vit, IP65