Calectro

CRH-RW-24V CRH is used for controlling the humidity and temperature of indoor environments. CRH has a factory calibrated CMOS humidity and temperature sensor element with I2C communication and low...

CTA-24/230V CTA is an overheating alarm for use in fire monitoring, industrial applications, etc. CTA can be supplied with 24V AC/DC via terminal 15-16 or 230V AC via terminal 1-2. CTA has two...

CTS-BC-50-PT1000 CTS-BC-50-PT1000 is a universal temperature sensor with a 50 mm acid proof bulb. The bulb sensor is available in models with cable length: 1.5 m, 5 m and 10 m...

CTS-CC-PT1000 CTS-CC-PT1000 is a strap-on temperature sensor, supplied with gap filler and high temperature tie straps for attachment. The grey side of the gap filler is to be towards the surface...

CTS-DC-X-PT1000 CTS-D temperature sensor is used for measuring air temperatures in ventilation ducts. Ordering example CTS-DC-100-PT1000 Duct sensor 100 mm, housing CTS-DC-200-PT1000 Duct sensor 200...

CTS-DH-X-PT1000 CTS-D temperature sensor is used for measuring air temperatures in ventilation ducts. Ordering example CTS-DH-100-PT1000 Duct sensor 100 mm, housing CTS-DH-200-PT1000 Duct sensor 200...

CTS-IC-X-PT1000 Immersion temperature sensor for fluids, with variable insertion length and clamp ring coupling. ORDERING EXAMPLE CTS-IC-100-PT1000 Fluid immersion sensor 100 mm,...

CTS-IH-X-PT1000 Immersion temperature sensor for fluids, with variable insertion length and clamp ring coupling. ORDERING EXAMPLE CTS-IH-100-PT1000 Fluid immersion sensor 100 mm,...

CTS-OW-PT1000 CTS-OW-PT1000 is a sensor for outdoor temperature measurement. It is delivered with a spacer bracket to minimize the temperature influence from the surface where the sensor is mounted,...

CTS-RB-PT1000 CTS-R temperature sensor is used for measuring air temperatures. Properties Temperature range -30 to +70°C Pt1000 sensing element Simple mounting Black (also available in white and...

CTS-RW-PT1000 CTS-R temperature sensor is used for measuring air temperatures. Properties Temperature range -30 to +70°C Pt1000 sensing element Simple mounting White (also available in black and...

E-SENSE E-SENSE is designed to control ventilation by transmitting the measured carbon dioxide level to the system DUC (dataundercentral = data subcenter). According to the BBR 94 rules of The...

E-SENSE-D E-SENSE-D is designed to control ventilation by transmitting the measured carbon dioxide level to the system DUC (dataundercentral = data subcenter). According to the BBR 94 rules of The...

Termonic 16090 Termonic 16090 is an electronic thermostat with an external sensor, for on-off regulation. It is used to regulate e.g. refrigeration systems, air conditioning systems, antifreeze...

Termonic 16150 Termonic 16090 is an electronic thermostat with an external sensor, for on-off regulation. It is used to regulate e.g. refrigeration systems, air conditioning systems, antifreeze...

ETUK-1 ETUK-1 is a standard enclosure with DIN rail for mounting e.g. our thermostats and control units on the wall. It is intended for products with 2-3 modules and is IP55. Standard enclosure made...

EVC-PY-DA Calectro introduces a completely new optical smoke detector model for ventilation ducts and ceiling installation. The new smoke detector EVC-PY-DA has been equipped with a new mechanical...

EVC-PY-DA-MB Connect EVC-PY-DA-MB to a Modbus master that scans the Modbus registers in the smoke detector. Three status indications are possible to read out of the smoke detector: Smoke alarm,...

EVC-PY-DA-UL EVC-PY-DA-UL has an intelligent monitoring circuit that continuously checks and adjusts the sensitivity for optimum functionality during the entire life of the detector. When the...

EVC-PY-IS ATEX The EVC-PY-IS ATEX detector is used in areas that require Ex-protected or intrinsically safe smoke detectors. The smoke detector provides a quick and reliable warning. The detection...